CO Detector for Car Parks, HVAC & Ventilation

HVAC CO Car Parks InstallationThe ESCO-200 is a low cost yet highly accurate CO (carbon monoxide) detector is ideal for car park, garages and tunnel HVAC installations and monitoring of indoor air quality (IAQ).

Our sensors have either voltage or 4 to 20mA outputs and are suitable for any HVAC installation and controllers. We can connect to your BMS or we can connect to our preferred BMS Controller, the V-TCX2-4086.

 

Contact Us
Related links

CO Detector Ventilation

Features of the ESCO-200
  • low cost, yet highly accurate CO sensor and transmitter
  • adaptable to any HVAC or automated system
  • voltage or 4..20mA outputs
  • semiconductor principle to measure CO
  • available with or without a LCD display screen

Specifications of the ESCO-200

General Performance

  • Operating Temperature range: -10 ~ 50℃
  • Operating Humidity range: 0 ~ 90% RH (Non-condensing)
  • Storage Temperature: -30℃ ~60℃
  • Storage Humidity: 0~95%RH (Non-condensing)
  • Lifespan: 5+ years

Carbon Monoxide Detector Ventilation AustraliaCO Measurement

  • Sensing Method: Semiconductor
  • Measurement Range: 0 to 300 ppm OR 0 to 1,000ppm
  • Accuracy: At 23℃, 50%RH:
    0~100ppm : ±15% FS
    100~1,000ppm : ±25% FS
  • Response Time: Within 5 minutes
  • Sampling Interval: 30 sec.

Electrical Data

  • Power Input: 24VDC (3-Wire) or 24VAC/24VDC ( 4-Wire)
  • Output Voltage: 2 ~ 10VDC; Output Current: 4 ~ 20mA

 

Recommended Maintenance

Air Quality Sensors recommends the ESCO-200 be checked and re-calibrated (if required) on a regular basis. Air Quality Sensors recommends the ESCO-200 have a calibration check every 6 months. Please read the following document on the calibration check procedure:

How to check and re-calibrate the ESCO-200 CO Detector

Disclaimer: The ESCO-200 is delivered to you checked and calibrated by the manufacturer and Air Quality Sensors. Once the detector is in your possession, it is then your responsibility to ensure its safe operation. Air Quality Sensors, or any of its suppliers, will not be responsible for poor installation, operation or maintenance of the ESCO-200 by the end customer.

 

Carbon Monoxide ControllerVentilation Controller Information

Download Spec Sheet for V-TCX2-4086 Controller

Manual

Download ESCO-200 CO Detector Manual

Download Vector Controller Manual

 

Contact Us

Related Products